/

Connecting to my Nethack/DGamelaunch Server

nethack Logo

Running Battle for Multiuser Nethack over I2P is possible using “Standard” streaming tunnels.

  1. First, set up a client tunnel:
    • Client Tunnel
  2. Pick a “Standard” tunnel for your tunnel type:
    • Tunnel Type
  3. Set a tunnel name and description:
    • Tunnel Name and Description
  4. Enter: zcojbufszefu5bfht5cem3zlhfvv5y3jzpzbaccu3ehje4d7pb2a.b32.i2p as the destination:
    • Tunnel Destination
  5. Pick a local host and port. This is the port you will telnet to to connect.
    • Local Host and Port
  6. Decide whether you want the tunnel to start automatically:
    • Decide whether to autostart
  7. Make sure the settings look ok, and save the new tunnel:
    • Review settings and finish

It may improve performance to reduce the length of your tunnel. Since playing Multiuser Nethack is a mostly low-risk activity, I recommend visiting the nethack.idk.i2p tunnel on the I2P Tunnel Manager Page, http://127.0.0.1:7657/i2ptunnelmgr and changint the settings to use short, 1-hop tunnels. These are the tunnel settings I use.

Then you can connect to the Nethack server by running the command: 

telnet localhost 7680

If you would rather set up your tunnel by dropping in a configuration file, you can use this one: i2ptunnel-nethack.conf or copy-paste the section below. 

interface=127.0.0.1
listenPort=7680
name=nethack.idk.i2p
option.i2cp.closeIdleTime=1800000
option.i2cp.closeOnIdle=false
option.i2cp.delayOpen=false
option.i2cp.destination.sigType=7
option.i2cp.leaseSetEncType=4,0
option.i2cp.newDestOnResume=false
option.i2cp.reduceIdleTime=1200000
option.i2cp.reduceOnIdle=true
option.i2cp.reduceQuantity=1
option.i2p.streaming.connectDelay=0
option.inbound.backupQuantity=2
option.inbound.length=1
option.inbound.lengthVariance=0
option.inbound.nickname=nethack.idk.i2p
option.inbound.quantity=3
option.outbound.backupQuantity=2
option.outbound.length=1
option.outbound.lengthVariance=0
option.outbound.nickname=nethack.idk.i2p
option.outbound.quantity=3
option.persistentClientKey=true
option.useSSL=false
privKeyFile=i2ptunnel-nethack-privKeys.dat
sharedClient=false
startOnLoad=true
targetDestination=zcojbufszefu5bfht5cem3zlhfvv5y3jzpzbaccu3ehje4d7pb2a.b32.i2p
type=client
Get the source code:
I2P