Q88
| Q88 | |
|---|---|
 | |
| Manufacturer | Manufacturer |
| Dimensions | 182mm x 120mm x 10mm |
| Release Date | Month year |
| Website | Device Product Page |
| Specifications | |
| SoC | A13 @ 1Ghz |
| DRAM | 512MiB DDR3 @ xxxMHz |
| NAND | 4/8GB |
| Power | DC 5V @ 3A, 3700mAh 3.7V Li-Ion battery |
| Features | |
| LCD | 800x480 (7" 16:9) |
| Touchscreen | X-finger capacitive (TODO: Manufacturer device FIXME) |
| Video | HDMI (Type C - mini) |
| Audio | 3.5mm headphone plug, internal speaker, internal microphone |
| Network | WiFi 802.11 b/g/n (Realtek device FIXME) |
| Storage | µSD |
| USB | 1 USB2.0 OTG |
| Camera | 0.3MP (640x480) front |
| Other | Accelerometer (Manufacturer deviceFIXME) |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
Contents |
Identification
This section explains how to most easily identify your device. For a development board, explain the name(s) printed on the board. For an android device, find out the strings as reported under settings.
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
Retrieved by other means
- Name in build.prop: A13-MID
- Product name: nuclear-pfdq88
- Device name: nuclear
- Board name: Q88
Sunxi support
Current status
Supported.
Images
Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code.
HW-Pack
Add MANUFACTURER DEVICE HW-pack specifics here.
BSP
Add MANUFACTURER DEVICE BSP specifics here.
Manual build
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
The something button triggers FEL mode.
Device specific topic
...
Adding a serial port (voids warranty)
Device disassembly
See the Q8 tablet format disassembly page.
Locating the UART
Todo: document which pin is RX and which is TX, as the picture is not clear.
There are two pads between the SoC and the SD slot. They might be multiplexed with the SD-Card. Determine which is RX and which is TX and attach some wires according to our UART howto.
Pictures
Take some pictures of your device, upload them, and add them here.
Also known as
- YeahPad A13 (Verify!)
- RoverPad 3W T74L(GF) (Verify!)
- EVOQ QPAD710A (Verify!)
See also
Add some nice to have links here. This includes related devices, and external links.
