Jide Remix Mini
| Jide Remix Mini | |
|---|---|
 | |
| Manufacturer | Jide |
| Dimensions | 124mm x 88mm x 26mm |
| Release Date | October 2015 |
| Website | Device Product Page |
| Specifications | |
| SoC | H64 @ 1152MHz |
| DRAM | 1GiB/2GiB DDR3L @ xxxMHz (H5TC4G83AFR-PBA * 2) |
| Power | DC 5V @ 3A |
| Features | |
| Video | HDMI (Type A - full) |
| Audio | 3.5mm combo headphone/microphone plug, HDMI |
| Network | WiFi 802.11 b/g/n + bluetooth 4.0 (Realtek RTL8273BS), 100Mbps Ethernet (X-Powers AC200) |
| Storage | 8/16GB eMMC, µSD |
| USB | 2 USB2.0 Host |
| Other | IRDA |
This page needs to be properly filled according to the New Device Howto and the New Device Page guide.
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.
Contents |
Identification
This section explains how to most easily identify your device. For a development board, explain the name(s) printed on the board. For an android device, find out the strings as reported under settings.
On the back of the device, the following is printed:
Manufacturer Marketing Name ModelNumber
The PCB has the following silkscreened on it:
LIA-BB-V6.66 1970-01-01
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
Sunxi support
Current status
Still unsupported. The Pine64 board is currently de-facto the reference hardware for working on Allwinner A64/H64/R18 support in the mainline U-Boot and the mainline Linux kernel. You can track all the progress there.
Images
Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.
HW-Pack
Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.
BSP
Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.
Manual build
You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.
U-Boot
Sunxi/Legacy U-Boot
Use the MANUFACTURER_DEVICE build target.
Mainline U-Boot
Use the MANUFACTURER_DEVICE build target.
Linux Kernel
Sunxi/Legacy Kernel
Use the MANUFACTURER_DEVICE.fex file.
Mainline kernel
Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
FEL mode
Remix Mini boots from the internal 8/16 GiB eMMC and does not recognize any inserted SD card as a bootable media by default, so FEL mode appears to be the only way to unbrick the device or install custom software on it instead of the pre-installed Remix OS. To trigger FEL mode, there is a button accessible via the pin-hole, located between the SD card slot and the audio jack. A somewhat special USB cable (A male to A male) is needed to connect the upper USB host receptacle to your desktop PC, which is running the sunxi-fel tool.
eMMC
Remix Mini has eMMC connected to SMHC2 (0x1C11000) and apparently clocked at 100MHz according to the dmesg log from Remix OS.
Device specific topic
If there are no further device specific topics to add, remove these sections.
...
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
Device disassembly
If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Pictures
Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.
Also known as
List rebadged devices here.
See also
Add some nice to have links here. This includes related devices, and external links.
Manufacturer images
Optional. Add non-sunxi images in this section.
