DRAM Controller
Several different families of DRAM controllers exist:
sun4i (Allwinner A10), sun5i (Allwinner A13) and sun7i (Allwinner A20) hardware
No accurate documentation for this particular DRAM controller exists in public access. But it is suspected that Allwinner uses one of the revisions of Synopsys DesignWare DDR2/3-Lite Memory Controller IP (MCTL) combined with DDR2/3-Lite PHY IP in A10/A13/A20. Also this DRAM controller apparently has siblings in Rockchip RK29XX, RK30XX and TI KeyStone2 hardware, which have some documentation and some bits of kernel and bootloader sources available in the Internet. Not to mention the original Allwinner boot0 bootloader sources and the suspend support code from the linux-sunxi kernel. This provides enough hints for finding out how the DRAM controller actually works by checking various bits of information via the trial and error method.
As a result, we have a reasonably usable reconstructed A10 DRAM Controller Register Guide.
A10 DRAM Controller Performance
A10 DRAM Controller Calibration
See also: DRAM controller quirks
sun6i (Allwinner A31) hardware
A31 boot0/boot1 source: [1]
A31 u-boot support: A31 dram.c dram_sun6i.c
A31 DRAM Controller Register Guide
sun8i (Allwinner A23) hardware
Some initial register dumps from A23 reveal that there are significant differences between the A31 and A23 dram controllers. There are dram controller register defines in the a23 suspend code in this code (dram_init) the SPL parameters are read and stored into structure defined here without using the definition.
